Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank

Price: $17.12


Features:
  • Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
  • Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
  • Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.


10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF

Price: $14.99


Features:
  • ❸SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
  • ❶WIDE APPLICATION: CNC Router Bit is used for Carving, Cutting, Slotting, Milling, Hollow Cutting in materials like hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • ❷HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx.


5Pcs End Mill Set, Yosoo HSS CNC 1/8'' End Mill Cutter Drill Bits 1/4'' Shank for Wood, Nylon, Aluminum, Steel,Titanium, 4 Flute Straight End Mill Set 1/8'' - 1/4''

Price: $16.99


Features:
  • 【WIDE APPLICATION】A Wide Range of Materials can be engraved, including: Hardness of metal for above 30 degrees, hardwood, medium density board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • 【HEAVY DUTY & SOLID CONSTRUCTION】Made of ultra-fine grain carbide, ensuring high work efficiency with good milling, cutting performance.
  • 【SIZE】Cutting Diameter:1/8''; Cutting Depth:12mm/4.72in; Shank Diameter:1/4''.


Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

List price: $64.69
Price: $44.97


Features:
  • Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220
  • Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station
  • Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece


1/8" 4Fl SE Carbide End Mill

1/8" 4Fl SE Carbide End Mill

Price: $7.95


Features:
  • Shank Diam.: 1/8"
  • Solid Micrograin Carbide. Style E700.
  • Length of Flutes: 1/2"

Milling with a Dremel

I bought a Dremel workstation and a 4" cross slide vice. I changed the depth gauge on the workstation so that it stay at the depth you set it to. I mounted the vice on the Workstation and the...

Inside the glorious and lucrative world of Instagram's famous pups - Mashable

Manny has achieved a lot for a six year old.

He's a philanthropist and social media influencer with more than a million followers on Instagram, including Snoop Dogg and Martha Stewart. He’s appeared on Good Morning America and had his own booth at a music festival. He has numerous licensing and sponsorship deals with brands like Turtle Wax and Dremel.

Oh, and he’s a...

Source: mashable.com

Google news feed

  1. This RSS feed URL is deprecated
  2. Mashable Inside the glorious and lucrative world of Instagram's famous pups
    “Instagram pet celebrities have a large influence on their fans, which is why the ASPCA often collaborates with them to spread awareness about key animal welfare issues including the importance of pet adoption, how to end puppy mills, and the cruelty
  3. 3D Printing Industry New York City Maker Faire 2017 – the 3D printing perspective
    Dremel had two exhibits onsite at World Maker Faire: one dedicated to its rotary tools and one to its growing line of digital fabrication products. The brand offered make-and-take projects, an onsite sweepstakes and a Keshot photo booth. Attendees
  4. GeekDad (blog) Dremel 3D Idea Builder
    I was originally planning on making the entire thing out of wood but was concerned with how I was going to make the hilt– to the rescue! I used 123D Design to build the model, and, thanks to the great Prop: 3D videos from my
  5. Hackaday 3D Printer Transforms to CNC
    I want(ed) to build a “cost down” an excluding linear rails and ball screws was the main focus. Admittedly I have spent money on other expensive items like planetary reduction gears but I am still with Version 1.0 so I hope (if this succeeds) to reduce

Directory

  1. Our always-on-the-leading-edge friend Phillip Torrone over at Make just posted this sweet Dremel-powered mill a bit ago. It provides a firm, adjustable ...
  2. Ah the ubiquitous Dremel rotary mini moto-tool, what can be better? Lots actually! In this Instructable I will give plenty of examples. The case often can be made...
  3. Now that all the major components have been fitted we will rivet in the rails. You don't need a lot of fancy or expensive tools to do this. You will need 2 rivet ...
  4. Build a Brooks-Stent tool and cutter grinder for the home shop. Includes attachments for end mill flutes, and slitting saws.
  5. Ball-end Hex Wrenches (11-04-13) These are so handy that I should have added them to this page years ago. (but I've been busy!) I have an SAE and a metric set made by ...



Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank

Price: $17.12


Features:
  • Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
  • Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
  • Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.


10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF

Price: $14.99


Features:
  • ❸SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
  • ❶WIDE APPLICATION: CNC Router Bit is used for Carving, Cutting, Slotting, Milling, Hollow Cutting in materials like hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • ❷HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx.


5Pcs End Mill Set, Yosoo HSS CNC 1/8'' End Mill Cutter Drill Bits 1/4'' Shank for Wood, Nylon, Aluminum, Steel,Titanium, 4 Flute Straight End Mill Set 1/8'' - 1/4''

Price: $16.99


Features:
  • 【WIDE APPLICATION】A Wide Range of Materials can be engraved, including: Hardness of metal for above 30 degrees, hardwood, medium density board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • 【HEAVY DUTY & SOLID CONSTRUCTION】Made of ultra-fine grain carbide, ensuring high work efficiency with good milling, cutting performance.
  • 【SIZE】Cutting Diameter:1/8''; Cutting Depth:12mm/4.72in; Shank Diameter:1/4''.


Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

List price: $64.69
Price: $44.97


Features:
  • Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220
  • Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station
  • Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece


1/8" 4Fl SE Carbide End Mill

1/8" 4Fl SE Carbide End Mill

Price: $7.95


Features:
  • Shank Diam.: 1/8"
  • Solid Micrograin Carbide. Style E700.
  • Length of Flutes: 1/2"

Milling with a Dremel

I bought a Dremel workstation and a 4" cross slide vice. I changed the depth gauge on the workstation so that it stay at the depth you set it to. I mounted the vice on the Workstation and the...

Inside the glorious and lucrative world of Instagram's famous pups - Mashable

Manny has achieved a lot for a six year old.

He's a philanthropist and social media influencer with more than a million followers on Instagram, including Snoop Dogg and Martha Stewart. He’s appeared on Good Morning America and had his own booth at a music festival. He has numerous licensing and sponsorship deals with brands like Turtle Wax and Dremel.

Oh, and he’s a...

Source: mashable.com

Google news feed

  1. This RSS feed URL is deprecated
  2. Mashable Inside the glorious and lucrative world of Instagram's famous pups
    “Instagram pet celebrities have a large influence on their fans, which is why the ASPCA often collaborates with them to spread awareness about key animal welfare issues including the importance of pet adoption, how to end puppy mills, and the cruelty
  3. 3D Printing Industry New York City Maker Faire 2017 – the 3D printing perspective
    Dremel had two exhibits onsite at World Maker Faire: one dedicated to its rotary tools and one to its growing line of digital fabrication products. The brand offered make-and-take projects, an onsite sweepstakes and a Keshot photo booth. Attendees
  4. GeekDad (blog) Dremel 3D Idea Builder
    I was originally planning on making the entire thing out of wood but was concerned with how I was going to make the hilt– to the rescue! I used 123D Design to build the model, and, thanks to the great Prop: 3D videos from my
  5. Hackaday 3D Printer Transforms to CNC
    I want(ed) to build a “cost down” an excluding linear rails and ball screws was the main focus. Admittedly I have spent money on other expensive items like planetary reduction gears but I am still with Version 1.0 so I hope (if this succeeds) to reduce

Directory

  1. Our always-on-the-leading-edge friend Phillip Torrone over at Make just posted this sweet Dremel-powered mill a bit ago. It provides a firm, adjustable ...
  2. Ah the ubiquitous Dremel rotary mini moto-tool, what can be better? Lots actually! In this Instructable I will give plenty of examples. The case often can be made...
  3. Now that all the major components have been fitted we will rivet in the rails. You don't need a lot of fancy or expensive tools to do this. You will need 2 rivet ...
  4. Build a Brooks-Stent tool and cutter grinder for the home shop. Includes attachments for end mill flutes, and slitting saws.
  5. Ball-end Hex Wrenches (11-04-13) These are so handy that I should have added them to this page years ago. (but I've been busy!) I have an SAE and a metric set made by ...