OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit

OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit

List price: $189.95
Price: $114.99


Features:
  • Removes and installs press-fit parts such as ball joints universal joints and truck brake anchor pins
  • Weighs 15 lbs, 3 oz
  • Contains 3 receiver tubes measuring 2-3/4 inch I.D. x 3 inch O.D. 2-1/4 inch I.D. x 2-1/2 inch O.D. and 1-3/4 inch I.D. x 2 inch O.D.


Moog K6292 Ball Joint

List price: $33.29
Price: $26.99


Features:
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
  • Belleville washer preload provides lower torque and stud articulation with minimal axial clearance.
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.


OTC (7894) Jeep/Dodge Ball Joint Service Adapter

OTC (7894) Jeep/Dodge Ball Joint Service Adapter

List price: $130.95
Price: $92.83


Features:
  • Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup
  • Removes and installs the offset ball joints used to change caster/camber
  • Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints


OTC (8031) Ball Joint Set for Jeep/Truck

OTC (8031) Ball Joint Set for Jeep/Truck

Price: $348.93


Features:
  • The high clearance, specially designed and produced OTC large C-frame allows for the repair of the most recent vehicles
  • Large C-frame, 19 adapters, and replaceable forcing screw tip to allow the use of the adapters in the 6530 kit to be used for other applications
  • Kit comes in a blow-molded case and includes an application chart and instructions


Moog K6540 Ball Joint

Moog K6540 Ball Joint

List price: $50.22
Price: $38.89


Features:
  • Moog instruction sheets contain specific information about press in ball joint orientation, where applicable.
  • An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. Moog Problem Solver design includes an oversized housing for a more secure fit.
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.

How to Remove a Ball Joint Safely - Harbor Freight Ball Joint Separator Tool Review

Safely and easily remove a ball joint from a car or truck's suspension and steering components. This video reviews the Harbor Freight Ball Joint Separator tool, item #99849, and highlights...

Directory

  1. Page 4 For technical questions, please call 1-800-444-3353. Item 60827 To Install a Ball Joint 1. Clean the vehicle’s control arm, and coat the inside
  2. Helpful information on using your Harbor Freight U-joint tool.
  3. wheel hub hammer the hub out the upright then use the harbor freight tool from there. You don't need any special tools to get the bearing out but if you are
  4. To replace the inner tie rod you start by removing the outer tie rod (end). In order to change the iinner tie rod without removing the rack you need a special tool.
  5. If you buy something through our links, ToolGuyd might earn an affiliate commission. Several people wrote in about a new line of Harbor Freight Hercules cordless ...


OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit

OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit

List price: $189.95
Price: $114.99


Features:
  • Removes and installs press-fit parts such as ball joints universal joints and truck brake anchor pins
  • Weighs 15 lbs, 3 oz
  • Contains 3 receiver tubes measuring 2-3/4 inch I.D. x 3 inch O.D. 2-1/4 inch I.D. x 2-1/2 inch O.D. and 1-3/4 inch I.D. x 2 inch O.D.


Moog K6292 Ball Joint

List price: $33.29
Price: $26.99


Features:
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
  • Belleville washer preload provides lower torque and stud articulation with minimal axial clearance.
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.


OTC (7894) Jeep/Dodge Ball Joint Service Adapter

OTC (7894) Jeep/Dodge Ball Joint Service Adapter

List price: $130.95
Price: $92.83


Features:
  • Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup
  • Removes and installs the offset ball joints used to change caster/camber
  • Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints


OTC (8031) Ball Joint Set for Jeep/Truck

OTC (8031) Ball Joint Set for Jeep/Truck

Price: $348.93


Features:
  • The high clearance, specially designed and produced OTC large C-frame allows for the repair of the most recent vehicles
  • Large C-frame, 19 adapters, and replaceable forcing screw tip to allow the use of the adapters in the 6530 kit to be used for other applications
  • Kit comes in a blow-molded case and includes an application chart and instructions


Moog K6540 Ball Joint

Moog K6540 Ball Joint

List price: $50.22
Price: $38.89


Features:
  • Moog instruction sheets contain specific information about press in ball joint orientation, where applicable.
  • An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. Moog Problem Solver design includes an oversized housing for a more secure fit.
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.

How to Remove a Ball Joint Safely - Harbor Freight Ball Joint Separator Tool Review

Safely and easily remove a ball joint from a car or truck's suspension and steering components. This video reviews the Harbor Freight Ball Joint Separator tool, item #99849, and highlights...

Directory

  1. Page 4 For technical questions, please call 1-800-444-3353. Item 60827 To Install a Ball Joint 1. Clean the vehicle’s control arm, and coat the inside
  2. Helpful information on using your Harbor Freight U-joint tool.
  3. wheel hub hammer the hub out the upright then use the harbor freight tool from there. You don't need any special tools to get the bearing out but if you are
  4. To replace the inner tie rod you start by removing the outer tie rod (end). In order to change the iinner tie rod without removing the rack you need a special tool.
  5. If you buy something through our links, ToolGuyd might earn an affiliate commission. Several people wrote in about a new line of Harbor Freight Hercules cordless ...